EverFocus EDSR400H instruction manual E R F O C U S E L E C T R O N I C S C O R P O R a T I O N

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N

¾Please Note: Make sure the modem is in bridge mode. If your Internet Service Provider is BellSouth you will have a modem/router. BellSouth provides a Westell modem that includes a built-in router. You will need to disable the router functionality.

¾The next step is to open ports within your router. Open virtual ports in the router (Log into the router using a PC)

oEDR Ports to open: 80, 1111, 1600

oEDSR Ports to open: 80, 1111, 2222, 3333, 4444, 6666

ƒPlease Note: If your Internet service provider blocks port 80 you may use a different port to access the DVR through the routers UPNP forwarding (Linksys feature) or Virtual Server (D-Link feature). This will be addressed in the next two chapters.

¾If you have a Dynamic IP address and have open the ports simply go to Chapter 9 to Configure DDNS.

¾Once you have reached this point and you have restarted the digital recorder.

¾To access the DVR from a computer simply open Internet Explorer and in the address bar type:

http:// and the IP address of your internet service provider.

ƒPlease Note: If your Internet service provider blocks port 80 you may use a different port to access the DVR through the routers UPNP forwarding (Linksys feature) or Virtual Server (D-Link feature). This will be addressed in the next two chapters.

70