4.7.6Alarm Server Settings

Figure 4-37 Network Menu – Alarm Server

This menu defines the parameters for communicating with a PC.

Server IP1~3: IP address of client PC. The network alarm can be transmitted to up to 3 addresses.

Protocol: Select the protocol type for alarm transmission: UDP: User Datagram Protocol

TCP: Transmission Control Protocol

Port: Select the transmission port for network alarm messages

Network ID: The network ID is an identifier for the alarm transmitter (DVR sending the alarm).

Click button to return to the previous level of menu.

72

Page 80
Image 80
EverFocus EMV1200 user manual Alarm Server Settings, Network Menu Alarm Server