EverFocus EPH5212 user manual Issue Enter into Main Menu

3.4.3 Privacy zones

Issue: 1.0

- Enter into {Main Menu}

- Select {Display} and move to {Setup} using joystick [ ]

- Use the joystick to move the label up, down, left, and/or▶ right. - Press [Tele] button to edit the position of labels.

- Move the joystick right [ ] to change the status of labels - Other labels can be set ▶with same method.

- Press [Far] button to return the previous menu (OSD setup). - Press [Open] button or use joystick to save the status.

- Press [Close] button or use joystick to return to previous menu (Back).

A privacy mask zone allows an administrator to program one four-sided, user defined zone which cannot be viewed by operators. The mask can be changed with pan angle and tilt angle using joystick and be adjusted in size according to zoom ratio [Tele/Wide]. Maximum 15 positions can be displayed on the monitor screen. The speed of displaying masks is proportional to the number of masks on the screen. It is recommended that you set the size to at least twice the size of the object (height and width).

- Enter into {Main Menu}

- Select Display and Privacy Zone using joystick [ ].

- Move the joystick left or right to select zone ID[00~14].

- To program a Privacy Zone, select Edit Mask, move to a Target (Pan/Tilt) and adjust a Mask size (Zoom). - Press [Near] button or use joystick to save it.

- After editing a mask, you can re-size width & height using joystick [ ]. (e.g. ~5X)

- Set display On to display saved mask.	▶
- It is possible to clear saved zone No.xx individually.
- Press [Open] button or use joystick to save settings.▶

- Press [Close] button or use joystick to return to previous menu (Back). 19