Issue: 1.0
▲/▼: move joystick up and down for selecting an item.
/: move joystick left and right for moving an item.
◀/▶[Open]/ [Near]: move joystick right to select or save settings or go to edit pages.
▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).
A {Pattern} is to display (or recall) a memorized, repeated and serial trace of pan, tilt, zoom. The dome has maximum 8 {Patterns}. Each of the
Use the following steps to program {Pattern}.
-Enter into {Main Manu}
-Select {Auto Scan} and move left or right to select {Pattern} Number.
- Move the joystick right [ ] to edit {Pattern}
-Using the joystick, move▶to a desired target and press [Near] button to start programming {Pattern}
-Press [Near] button or use joystick to save settings.
-Press [Far] button or use joystick to return to previous menu {Pattern Setup} (Back).
-To edit and clear {Pattern Title}, refer to Editing a Title section (3.2.1).
-It is possible to clear saved Pattern No.xxx in the {Pattern setup} Menu individually.
-Press [Open] button or use joystick to save settings.
-Press [Close] or use joystick to return to previous menu (Back).
3.9 Tour Menu
29
