EverFocus EZN850 user manual Shutter

				EZN850
	SETUP
		DC <┘		LENS
> LENS
SHUTTER		___	> LEVEL	+++++++++ 20
WHITE BAL.		ATW
BACKLIGHT		OFF
AGC		MIDDLE
DNR		LOW
SENS-UP		AUTO <┘
SPECIAL <┘

EXIT

Note:

Since DC lens is a built-in lens for EZN850 camera, it does not support Manual lens, please do not select lens as Manual mode, it disables sens-up and may cause malfunction of lens.

2.Please click SET key for saving setting and return to the previous menu.

4.4.2.2 SHUTTER

1.When the SETUP menu is displayed on the screen, please direct the arrow to point to “SHUTTER” by clicking the DOWN (d) key.

2.Select the shutter mode by clicking the LEFT (e) or RIGHT (f) key.

Three modes are available. FLK, ESC and Manual.

Note:

Since DC lens is a built-in lens for EZN850 camera, shutter does not support ESC and Manual functions. ESC and Manual are reserved functions, please do not select these two options in normal situation.

ÖFLK: Please select “FLK” mode when flickering occurs on the screen, which is caused by an irregular balance between illumination and frequency. NTSC model: 1/100, PAL model: 1/120.

	SETUP
LENS		MANUAL
> SHUTTER		FLK
WHITE BAL.		ATW
BACKLIGHT		OFF
AGC		MIDDLE
DNR		LOW
SENS-UP		___
SPECIAL <┘
EXIT

25