|
|
| EZN850 |
Ö ESC: (Reserved). |
| ||
| SETUP |
|
|
LENS |
| MANUAL | BRIGHTNESS |
> SHUTTER |
| ESC <┘ | BRIGHTNESS +++++++++ 25 |
WHITE BAL. | ATW | ||
BACKLIGHT | OFF |
| |
AGC | MIDDLE |
| |
DNR | LOW |
| |
AUTO <┘ |
| ||
SPECIAL <┘ |
|
| |
EXIT
ÖManual: (Reserved).
| SETUP |
|
|
|
LENS |
| MANUAL | SHUTTER | |
> SHUTTER |
| MANUAL <┘ | > MANUAL | 1/50 |
WHITE BAL. | ATW | |||
BACKLIGHT | OFF |
|
| |
AGC | MIDDLE |
|
| |
DNR | LOW |
|
| |
___ |
|
| ||
SPECIAL <┘ |
|
|
| |
EXIT
3.Click the SET key when you finish all the settings.
Note:
With DC lens, the shutter speed is fixed as 1/60 for NTSC and 1/50 for PAL.
4.4.2.3 WHITE BALANCE Control
The screen color can be adjusted by using the WHITE BALANCE function.
1.Please direct the arrow to point to “WHITE BAL” on the SETUP menu by clicking UP (c) or DOWN (d) key.
2.Please select the mode you would like to operate by clicking LEFT (e) or RIGHT (f) key.
Please select one of the 3 modes below:
ÖATW (Auto Tracking White Balance): This mode can be used within the color temperature range from 2,500°K to 8,300°K (eg, fluorescent light, outdoor, sodium vapor lamp or inside tunnels).
ÖAWC (Auto White Balance Control): Click the SET key while the camera is directed at a piece of white paper to get the optimum state under the present illumination. If the environment and the light source are changed, you need to
26
