EZN850
adjust the white balance again.
ÖMANUAL: The manual adjustment mode enables a more precise adjustment. Please select ATW or AWC first. Then change to manual adjustment mode and click SET key. Set the suitable color temperature, and increase or decrease the red and blue color values at the same time while checking the color changes of the object.
SETUP |
|
|
| |
LENS | DC <┘ |
| WHITE BAL. | |
SHUTTER |
| ___ |
|
|
> WHITE BAL | . | MANUAL <┘ | RED | +++++++++ 32 |
BACKLIGHT |
| OFF | BLUE | +++++++++ 39 |
AGC | MIDDLE |
|
| |
DNR | LOW |
|
| |
AUTO <┘ |
|
| ||
SPECIAL <┘ |
|
|
| |
EXIT
Note:
Under the following conditions, the WHITE BALANCE function may not operate well. In such cases, please select the AWC mode.
1.When the object’s surroundings have a high color temperature.
2.When the object’s surroundings are dark.
3.If the camera faces a fluorescent light directly or is installed in a place where the illumination changes constantly, the WHITE BALANCE function may become unstable.
4.4.2.4 BACKLIGHT
Even there is a massive backlight behind the object, bright images of the background and the object can still be obtained by using the BACKLIGHT function.
1.Please direct the arrow to point to “BACKLIGHT” on the SETUP menu by clicking UP (c) or DOWN (d) key.
2.Select the mode you would like to operate by clicking LEFT (e) or RIGHT (f) key.
SETUP |
| |
LENS | DC <┘ | |
SHUTTER | ___ | |
WHITE BAL. | ATW | |
> BACKLIGHT |
| OFF |
AGC |
| MIDDLE |
DNR | LOW | |
AUTO <┘ | ||
SPECIAL <┘ |
| |
EXIT |
| |
27
