assembly instructions
-11-
Step 4:
Cap the Squat Lever (8) with one 2" End
Plug (50). Cap the Squat Arm (9) with two
2" Round End Plugs (51).
Insert the Squat Axle (24) into the hole in
the Upright (3) and through the sleeves
in the Squat Lever (8), Squat Arm (9) and
Squat Support (5). Attach using one 1/2"
x 1" Hex Head Bolt (78) and one 1/2" x
1-1/2" Washer (87). Insert one Cap For
Nut (55) over the head of the 1/2" x 1"
Hex Head Bolt (78).
Secure the Squat Axle (24) with one 5/16"
x 5/8" Set Screw (86). Cap the Squat
Support (5) with one 2" x 3" Rect End
Plug (52).
ASSEMBLY