1

hook

2

spring

10Remove the plastic battery-latch assembly by twisting the assembly slightly and lifting it out of the channel and away from the computer base.

1

1

battery latch assembly

Replacing the Battery Latch Assembly

1Insert the latch assembly into the channel on the computer base, and press it into place.

2Using a small screwdriver, hook the spring over the hook on the computer base.

3Place the battery latch release under the computer base, line it up with the hole in the base, and then replace the screw in the assembly.

Ensure that the newly installed latch moves smoothly and freely when pushed and released.

4Replace the hard drive bay and reinsert the four M2 x 3-mm screws.

5Replace the system board and the four M2.5 x 5 screws.

222

Adding and Replacing Parts

Page 222
Image 222
Dell PY760 manual Replacing the Battery Latch Assembly, 222