NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program.

3When the boot device list appears, highlight CD/DVD/CD-RW and press <Enter>.

4Select the Boot from CD-ROM option from the menu that appears and press <Enter>.

5Type 1 to start the Resource CD menu and press <Enter> to proceed.

6Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer.

7When the Dell Diagnostics Main Menu appears, select the test you want to run.

Dell Diagnostics Main Menu

1After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want.

NOTE: It is recommended that you select Test System to run a complete test on your computer.

Option

Function

 

 

 

Test Memory

Run

the stand-alone memory test

Test System

Run

System Diagnostics

Exit

Exit the Diagnostics

 

 

 

2After you have selected the Test System option from the main menu, the following menu appears:

NOTE: It is recommended that you select Extended Test from the menu below to run a more thorough check of devices in the computer.

Option

Function

 

 

Express Test

Performs a quick test of devices in the

 

system. This typically can take 10 to 20

 

minutes.

Troubleshooting

117

Page 117
Image 117
Dell PY760 manual Dell Diagnostics Main Menu, 117