6Remove the processor thermal-cooling assembly (see "Removing the Processor Thermal-Cooling Assembly" on page 200).

NOTICE: When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.

7To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.

1

2

3

1

ZIF-socket cam screw

2

pin-1 corner of microprocessor

3 Z IF-socket

NOTE: The ZIF-socket cam screw secures the processor to the system board. Take note of the arrow on the ZIF-socket cam screw, which indicates the direction to turn the cam screw.

8Lift the processor module from the ZIF socket.

Adding and Replacing Parts

203

Page 203
Image 203
Dell PY760 manual 203, ZIF-socket cam screw