Dell PY760 manual Removing the Palm Rest, 193

Removing the Palm Rest

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer.

1Follow the instructions in "Before Working Inside Your Computer" on page 156.

2Remove the optical drive (see "Optical Drive" on page 158).

3Remove the hinge cover (see "Removing the Hinge Cover" on page 173).

4Remove the display assembly (see "Removing the Display Assembly" on page 176).

5Remove the keyboard (see "Keyboard" on page 174).

6Remove the six M2.5 x 5-mm screws labeled "P" from the top side of the palm rest.

NOTE: The screw locations may vary slightly from the image shown below.

1

Adding and Replacing Parts

193