Dell PY760 manual Replacing the Palm Rest, 195, Biometric reader connector, LED board connector

1

2

3

1	biometric reader connector	2	touch-pad connector
3	LED board connector

10Disconnect the LED board connector.

11Lift the palm rest and remove it from the computer.

Replacing the Palm Rest

1Align the palm rest with the base and gently snap the palm rest into place.

2Reconnect the touch-pad connector to the system board.

3Reconnect the LED board connector to the system board.

4Replace the coin-cell battery (see "Replacing the Coin-Cell Battery" on page 191).

5Replace the six M2.5 x 5-mm screws on the top side of the palm rest.

6Turn the computer over, and replace the 12 M2.5 x 8-mm screws on the bottom of the computer.

Adding and Replacing Parts

195