Dell PY760 manual Keyboard, Replacing the Hinge Cover, 174

1

1 hinge cover

Replacing the Hinge Cover

With the display open all the way (180 degrees) so that it lies flat against the work surface, snap the cover back into place, starting from left to right.

Keyboard

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer.

1Follow the instructions in "Before Working Inside Your Computer" on page 156.

2Remove the hinge cover (see "Removing the Hinge Cover" on page 173).

3Remove the two M2.5 x 5-mm screws at the top of the keyboard.

174

Adding and Replacing Parts