1

hard drive bay

2

ExpressCard cage

3

M 2 x 3-mm screws (4)

4

ExpressCard connector

9Remove the four M2 x 3-mm screws that attach the ExpressCard cage to the top of the hard drive bay.

Smart Card Reader

Removing the Smart Card Reader

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer.

1Follow the instructions in "Before Working Inside Your Computer" on page 156.

2Remove the optical drive (see "Optical Drive" on page 158).

3Remove the hinge cover (see "Removing the Hinge Cover" on page 173).

4Remove the display assembly (see "Removing the Display Assembly" on page 176).

5Remove the keyboard (see "Keyboard" on page 174).

6Remove the palm rest (see "Palm Rest" on page 192).

7Remove the smart-card reader screw.

8Remove the smart-card reader connector from the system board.

9To remove the smart card reader, pry up the reader by the metal screw plate and pull up and lift out from underneath the side notches at a 30 degree angle.

Adding and Replacing Parts

211

Page 211
Image 211
Dell PY760 manual Removing the Smart Card Reader, 211, Hard drive bay ExpressCard cage X 3-mm screws