Dell PY760 manual Replacing the System Board, 218

1

1 system board assembly

Replacing the System Board

1Perform all of the steps in "Removing the System Board" on page 212 in reverse order.

NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

2Turn on the computer.

NOTE: If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD so that you can set up the computer to boot from a CD this one time only. Otherwise, you must enter the system setup program to change the default boot order.

3Insert the flash BIOS update program CD that accompanied the replacement system board into the optical drive. Follow the instructions that appear on the screen. See "Flashing the BIOS" on page 223 for further information.

4Enter the system setup program to update the BIOS on the new system board with the computer Service Tag.

218

Adding and Replacing Parts