Adding and Replacing Parts 209

Replacing the System Fan(s)

1
Carefully align the system fan over the system board and press down.
2
Tighten the two M2.5 x 5-mm screws on the system fan
ExpressCard Cage
CAUTION: Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
1 fan for video card/thermal- cooling
assembly, if installed
2 M2.5 x 5-mm screws (2)
3 fan cable 4 fan-cable system board connector
1
2
4
3
book.book Page 209 Wednesday, August 13, 2008 12:12 PM