192 Adding and Replacing Parts
Replacing the FCM
1
Align the flash card module with the top of the system board and gently
snap it into place.
2
Replace the M2.5 x 5-mm screw on the top of the flash card module.
3
Replace the display assembly (see "Replacing the Display Assembly" on
page179).
4
Replace the keyboard (see "Keyboard" on page174).
5
Replace the hinge cover (see "Replacing the Hinge Cover" on page174).
6
Replace the optical drive (see "Optical Drive" on page158).
Palm Rest CAUTION: Only trained service technicians are authorized to remove or replace
the component covered by the following procedure. See your Product Information
Guide for complete information about safety precautions, working inside the
computer, and protecting against electrostatic discharge.
1FCM 2screw
1
2
book.book Page 192 Wednesday, August 13, 2008 12:12 PM