Adding and Replacing Parts 163
Replacing the Memory Module(s)
NOTE: For optimal performance, identical memory modules should be used in each
connector.
1
Ground yourself and install the new memory module:
NOTE: If a memory module is not installed properly, the computer may not boot
properly. No error message indicates this failure..
a
Align the notch in the module edge connector with the tab in the
connector slot.
b
Slide the module firmly into the slot at a 45-degree angle, and rotate
the module down until it clicks into place. If you do not feel the click,
remove the module and reinstall it.
1memory module 2securing clips (2)
book.book Page 163 Wednesday, August 13, 2008 12:12 PM