Dell PY760 manual 194

1 M2.5 x 5-mm screws (6)

NOTE: If you are installing a new palm rest, remove the coin-cell battery from the old palm rest so that you can install it on the new palm rest. If you are removing the palm rest only to access other computer components, you do not need to remove the coin-cell battery from the palm rest.

7Remove the coin-cell battery, if appropriate (see "Removing the Coin-Cell Battery" on page 189).

8Turn the computer over and remove the 12 M2.5 x 8-mm screws from the bottom of the computer.

1

1 M2.5 x 8-mm screws (12)

9Turn the computer top-side up and disconnect the touch-pad connector from the system board.

194

Adding and Replacing Parts