Adding and Replacing Parts 205
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery
(see "Before Working Inside Your Computer" on page156) before working inside the
computer.
1
Follow the instructions in "Before Working Inside Your Computer" on
page156.
2
Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
3
Remove the keyboard (see "Keyboard" on page174).
4
Remove the display assembly (see "Removing the Display Assembly" on
page176).
5
Remove the palm rest (see "Removing the Palm Rest" on page193).
NOTE: Remove the video card/thermal-cooling assembly as a single unit. Do not
separate the thermal-cooling assembly from the video card.
6
Loosen the four captive screws on the video card/thermal-cooling
assembly.
7
Lift the video card/thermal-cooling assembly from the system board.
NOTE: The appearance of the video card/thermal-cooling assembly may vary,
depending on your computer configuration.
book.book Page 205 Wednesday, August 13, 2008 12:12 PM