
6Functional Specifications
8200 Format
If the tape is written in 8200 format, the tape drive can perform forward
Rewind Tape Speed
Table
The tape is positioned at LEOT when you issue a REWIND command.
The drum has not stopped rotating.
Tape tension has not been released.
Table 6-4 Typical rewind times
Size of | Length | Typical rewind time | |
EXATAPEa | m (ft) | (seconds) | |
15m | 15 | (49) | 50 |
|
|
| |
54m | 54 (177) | 100 | |
|
|
|
|
112m | 112 | (367) | 170 |
|
|
|
|
160m XLb | 160 | (524) | 240 |
aEXATAPE data cartridges are recommended for use with all Exabyte products and are available for purchase from Exabyte Corporation.
b160m XL media is intended for use in the
Reposition Time
Reposition time starts when the initiator issues a command that stops the tape drive’s motion control system and ends when the tape is repositioned, at nominal speed, so that the next byte of data can be transferred. Reposition time is independent of any interface delays.
Reposition time for the tape drive ranges from 1.2 sec to 1.5 sec.
510504 | ||
| (Standard and XL) |
|