4 Requirements for Use
Use the READ BUFFER command to copy the new code from a tape drive across the SCSI bus to an initiator. You can then use the WRITE BUFFER command to copy the code from the initiator to another tape drive.
For more information about the CTS Monitor program, refer to the CTS Monitor documentation. For more information about using SCSI commands, refer to the
Shipping Requirements
This section describes the shipping requirements for the tape drive, including information about the shipping carton and a list of the environmental conditions needed for transporting the tape drive.
Shipping Cartons
The tape drive is sealed in a static protection bag and is shipped with either one drive per carton (single pack) or with three to five drives per carton
Table
Table 4-4 Single pack and multi-pack shipping dimensions and weights
Size | Dimensions | Weight |
|
|
|
13.5 inches long × | 1 CTS: 4.5 lbs (2.0 kg) | |
| 10.75 inches wide × |
|
| 8.5 inches high |
|
| (34.3 × 27.3 × 21.6 cm) |
|
|
|
|
23.25 inches long × | 3 CTSs: 12 lbs (5.4 kg) | |
| 13.5 inches wide × | 4 CTSs: 15 lbs (6.5 kg) |
| 11.5 inches high | 5 CTSs: 18 lbs (8.2 kg) |
| (59.1 × 34.3 × 29.2 cm) |
|
|
|
|
May 1994 | ||
| (Standard and XL) |
|
