Exabyte EXB-8505 8mm manual Grounding Hole and Ground Tab, 2Chassis ground location on back panel

6Functional Specifications

Grounding Hole and Ground Tab

The rear panel of the EXB-8205 and EXB-8505 includes a grounding hole and a ground tab, as shown in Figure 6-2.These can be used to provide additional chassis grounding if desired. The grounding hole uses an M3 0.5 6mm self-tapping screw, while the ground tab uses a 1⁄4-inch female spade connector.

Note: The power supply returns are connected to the chassis, so you cannot isolate logic common ground from chassis ground.

Figure 6-2Chassis ground location on back panel

6-14	EXB-8205 and EXB-8505	510504
	(Standard and XL)