Exmark Lazer Z XP manual Danger, Transporting

Models: Lazer Z XP

1 60
Download 60 pages 54.56 Kb
Page 28
Image 28
IMPORTANT: Operator must be in seat before the PTO can be engaged.

4.3.4Engaging PTO:

DANGER

POTENTIAL HAZARD

The rotating blades under the mower deck are dangerous.

WHAT CAN HAPPEN

Blade contact can cause serious injury or kill you.

HOW TO AVOID THE HAZARD

DO NOT put hands or feet under the mower or mower deck when the blades are engaged.

4.4TRANSPORTING DANGER

POTENTIAL HAZARD

An uncovered discharge opening will allow objects to be thrown in an operator’s or bystander’s direction. Also, contact with blade could occur.

WHAT CAN HAPPEN

Thrown objects or blade contact can cause serious injury or death.

HOW TO AVOID THE HAZARD

Never operate mower with discharge deflector raised, removed, or altered unless there is a grass collection system or mulch kit in place and in proper working condition.

The PTO push-pull switch engages the cutting blades. Be sure that all persons are clear of the mower deck and discharge area before engaging PTO.

IMPORTANT: Operator must be in seat before the PTO can be engaged.

Set throttle to "midway" position. Pull outward on the switch to the “ROTATE” position. Accelerate to full throttle to begin mowing.

4.3.5Stopping PTO: Set throttle to the “midway” position. Push in on the switch to the “STOP” position stopping the cutting blades.

4.3.6Stopping Engine:

a)Bring unit to a full stop. Disengage the PTO, move motion control levers out to the neutral lock position and engage parking brake.

b)Before stopping the engine, move the throttle control to the “SLOW” position. Keep on running at idle for a short time, (approximately one minute) then stop the engine.

c)Rotate ignition switch to “OFF” position. Remove the key to prevent children or other unauthorized persons from starting engine.

d)Close fuel shut-off valve when machine will not be used for a few days, when transporting, and when the unit is parked inside a building.

4.4TRANSPORTING

4.4.1Transporting a Unit: Use a heavy-duty trailer or truck to transport the machine. Lock brake and block wheels. Securely fasten the machine to the trailer or truck with straps, chains, cable, or ropes. Be sure that the trailer or truck has all necessary lighting and marking as required by law. Secure a trailer with a safety chain.

- 23 -

Page 28
Image 28
Exmark Lazer Z XP manual Danger, Transporting, IMPORTANT Operator must be in seat before the PTO can be engaged