Exmark Lazer Z XP manual Hydrostatic Ground Drive System, Tires and Wheels, Cutting Deck

2.6.3Parking Brake Lever: Engages parking brake.

2.6.4Deck Height Adjustment Lever: Sets cutting height to desired position.

2.6.5Deck Lift Assist Lever: Foot pedal that assists in raising the deck.

2.7SEAT

2.7.1Type: Deluxe suspension seat with high back, low profile foam-in-place cushion (dampened, adjustable spring suspension) and armrests.

2.7.2Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with prop rod. Adjustable fore and aft seat track.

2.7.3Armrests: Molded adjustable flip-up armrests.

2.7.4Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

2.8HYDROSTATIC GROUND DRIVE SYSTEM

2.8.1Hydrostatic Pumps: Two Hydro Gear BDP-21L variable displacement piston pumps.

2.8.2Wheel Motors: Two Parker/Ross with 1 1/4” tapered shafts.

2.8.3Hydraulic Oil Type: Synthetic Mobil 1 15W-50.

2.8.4Hydraulic Oil Capacity: 4 qt. (3.8 L.)

2.8.5Hydraulic Filter: Replaceable cartridge type.

P/N 103-2146: 25 microns, No bypass

2.8.6Speeds: 0 - 12.0 mph (19.3 km/hr) forward. 0 – 8.0 mph (12.9 km/hr) reverse.

2.8.7Drive wheel release valves allow machine to be moved when engine is not running.

2.9TIRES AND WHEELS

2.9.1 Tires		Drive	Front Caster
		Pneumatic (Air-Filled)	Semi-Pneumatic
	Quantity	2	2
	Tread	Multi-Trac C/S	Smooth
	Size	26 x 12.0-12	13 x 6.50-6
	Ply Rating	4
	Pressure	10 psi (69 kPa)

2.10 CUTTING DECK

2.10.1 Cutting Width:	72 in. (182.9 cm)
	60 in. (152.4 cm)

2.10.2Discharge: Side

2.10.3Blade Size: (3 each) w/60” Deck 20.5 in. (52.1 cm) w/72” Deck 24.5 in. (62.2 cm)

2.10.4Blade Spindles: Solid steel spindles with 1” I.D. bearings.

2.10.5Deck Drive: Electric clutch mounted on horizontal engine shaft. 2 – “A” Section belts (with self-tensioning idlers) from electric clutch to transfer shaft mounted on deck.

Blades are driven by one “B” Section belt (w/self-tensioning idler) from transfer shaft on deck to blade spindles.

2.10.6Deck: Full floating deck is attached to out-front support frame. Six anti-scalp rollers provide maximum turf protection. Deck design allows for bagging, mulching or side discharge.

2.10.7Deck Depth: 5.5” (14.0 cm)

- 12 -