- 11 -
FIGURE 1
UPPER HANDLE MOUNTING
3.8 Route the t h r ot tle cable along the right side of the upper handle, thr ough the clip,
under the fuel tank suppor t, and position the cable on the left side of t he engine.
Attach thr o t t le cable t o engine:
a) Position the throttle control lever (located on console) ¼” (6mm) fr om the upper
end of t he slot .
b) Attach inner wire of the throttle cable to the t op hole in the throttle control lever
as shown in Figure 2.
c) Loosen the clamp, place t he cable behind it, and pull on the cable to m ove the
throttle linkage to the f ull throttle posit ion. Tighten the cable clamp screw.
FIGURE 2
SPEED CONTROL (THROTTLE CABLE HOOK- UP)
3.9 Connect the PT O engagement linkages. Loosen jam nut and rem ove turnbuckle
fr om lower link age. Screw turnbuckle onto both upper and lower link ages
simultaneously. (See figure 3) Note that the threads on upper linkage ar e left
hand. See 5.2.2 for linkage adjust ment.
Note: ECS handles have the PTO linkage on the inside of the PTO engagement
lever tab and the hairpin on t he out side.
FIGURE 3
PTO ENGAGEMENT LINKAGE