Extreme Networks 10018 manual CFP2 LR4 Module, CFP2 SR10 Optical Module Bail latch Open Position

Extreme Networks CFP2 modules

Figure 20: CFP2 SR10 Optical Module (Bail latch Open Position)

The CFP2 SR10 module is supported in the following Extreme Networks switches and components:

•BlackDiamond X8 switch

For technical specifications for the CFP2 SR10 module, see Technical Specifications.

CFP2 LR4 Module

The CFP2 LR4 is an optic transceiver for 100Gbps Ethernet applications. The module supports 100 Gigabit data rate that can reach up to 10 kilometers over standard single-mode fiber (SMF, G.652). Data is transmitted using four 25 Gigabit data lanes. The CFP2 LR4 uses an LC connector. Extreme Networks’ CFP2 optical module form factor, optical/electrical connection, and digital diagnostic interface are designed according to IEEE 802.3ba standards. Mechanical dimensions, connecters, and footprint of the module conform to the CFP MSA CFP2 Hardware Specification Revision 1.0 July 31, 2013 standard.

Figure 21: CFP2 LR4 Optical Module (Bail Latch Open Position)

The CFP2 LR4 module is supported in the following Extreme Networks switches and components:

•BlackDiamond X8 switch

For technical specifications for the CFP2 LR4 module, see Technical Specifications.

Pluggable Hardware Installation Guide 50