Extreme Networks XFP Modules

Remove an XFP Module

You can remove an XFP module from your Extreme Networks switch or I/O module without powering off the system. The XFP module is shown in XFP Module..

Note

Disconnect fiber-optic cable from an XFP module before removing the XFP module from the port.

1Rotate the handle (bail latch) on the XFP module downward (Removing an XFP Module).

2Carefully pull the XFP module out of the port.

Figure 18: Removing an XFP Module

3Place the dust covers back into the XFP module connectors.

4Place the XFP module immediately into an antistatic container to protect it from ESD damage and dust.

Pluggable Hardware Installation Guide

41

Page 41
Image 41
Extreme Networks 10018 manual Remove an XFP Module, Removing an XFP Module