Extron electronic DVC501SD manual Operation, Front Panel Powering On, Updating Firmware

Operation

This section discusses the functions available through the front panel to set up and operate the DVC 501 SD. Topics include:

•Front Panel

•Powering On

•Menus on the LCD Screen

•Resetting

•Front Panel Lockout (Executive Mode)

•Updating Firmware

Front Panel

1 2 3 4 5

CONFIG

MENU

NEXT

ADJUST

DVC 501 SD

DIGITAL VIDEO CONVERTER

Figure 9. DVC 501 SD Front Panel

The front panel features and controls shown in the illustration above are described starting below.

AConfig port — Connect a USB cable (USB A-to-mini-B) from your computer to this port to configure and control the DVC via SIS commands and to update the firmware.

BLCD screen — Displays menus, messages, and your selections from menus and submenus (see “Menus on the LCD Screen,” later in this section, for more information).

CMenu button — Press this button to access the DVC menu system and step through

the menus displayed on the LCD screen (B) (see “Menus on the LCD Screen” for details).

DNext button — Press this button to step through the submenus displayed on the LCD screen.

EAdjust knobs — Rotate these horizontal ([) and vertical ({) knobs to scroll through submenu options and make adjustments.

DVC 501 SD • Operation 9