4.On the Add Device window, select DVC 501 SD from the Device Name
Figure 20. Device Name
5.From the Connection Method
6.If using
7.Click Connect. If the connection is successful, DVC 501 SD is displayed in green and followed by a check mark in the Connected Device section.
8.Click the Browse button in the New Firmware File (Optional) section.
9.On the Open window, navigate to the new firmware file, which has an .s19 extension, and
Figure 21. Open Window for the Firmware Loader
CAUTION: Valid firmware files must have the file extension .s19. A file with any other extension is not a firmware upgrade for this product and could cause the DVC to stop functioning.
DVC 501 SD • Operation 18