Extron electronic DVC501SD manual Resetting, Exiting the Menu System, Int. Temp. screen

Color Bars Crop

Grayscale

1.33 Aspect

X-Hatch 4x4

Alt Pixels

1.78Aspect

1.85Aspect

2.35Aspect

Figure 19. DVC 501 SD Test Patterns

Int. Temp. screen

The Int. Temp. screen shows the current internal temperature of the DVC unit in degrees Fahrenheit and Celsius. This is an information-only screen; no adjustments can be made from it.

Exiting the Menu System

To exit the menu system, press the Menu button repeatedly until the EXIT MENU PRESS NEXT screen appears. Press the Next button to return to the default cycle.

Alternatively, wait until the menu system times out and the default cycle resumes (approximately 30 seconds).

Resetting

You can perform the following types of reset on the DVC 501 SD:

•Firmware and settings: To reset the DVC to its factory-installed firmware version, press the front panel Menu button while connecting power to the unit. Perform this reset if compatibility issues arise with an updated firmware version.

•Settings only: To reset the unit to factory default settings, press and hold the Next button while applying power to the unit. While the reset is in progress, the LCD screen displays SYSTEM RESET. When the reset is complete, the LCD screen displays EXTRON DVC 501, and the default cycle starts.

-or-

Enter the ZXXX SIS command (see the Resetting command in the “Remote Configuration and Control” section).

DVC 501 SD • Operation 16