Extron electronic FPM 101 Specifications, Optical specifications FLS 101 fiber optic output

Reference

Material

This section provides technical specifications, included and replacement part numbers, and optional accessories.

•Specifications

•Included Accessories

Specifications

NOTE: These devices are class 1 laser products. They meet the safety regulations of IEC-60825,

FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

Optical specifications — FLS 101 fiber optic output

Number/type
Singlemode	1 laser emitter
Multimode	1 LED emitter
Connectors	2 connectors with LC, SC FC, and ST adapters
Wavelengths
Singlemode	1310 nm ±20 nm, 1550 nm ±20 nm
Multimode	850 nm ±30 nm, 1310 nm -10/+50 nm
Spectral width
Singlemode	5 nm (max.) at 1310 nm and at 1550 nm
Multimode	40 nm (typical) at 850 nm
	120 nm (typical) at 1310 nm
Transmission power
Singlemode	0 dBm, 9 µm
Multimode	-20 dBm, 62.5 µm

NOTE: Power will be 3 dB lower if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-

wrapped jumper.

Stability
Singlemode	±0.05 dB over 1 hour after 15 minute warmup
	±0.1 dB over 8 hours after 15 minute warmup
Multimode	±0.1 dB over 8 hours after 5 minute warmup

Optical specifications— FPM 101

Wavelengths	850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm; calibrated
Detector type	Germanium (Ge)
Units of measurement	dB, dBm, µW

Fiber Optic Test Meters • Reference 20