Conventions Used in this Guide | Extron electronic FPM 101, FLS 101

CLASS 1 LED

PRODUCT

WARNING: Use of controls or adjustments other than those specified in this guide

may result in hazardous radiation exposure.

The FLS 101 optical light source is a registered Class I LED and Laser Product.

WARNING: To avoid the danger of fire and electrical shock:

• Never use a voltage that is different from that for which the AC adapter is rated.

• Do not plug the unit into a power outlet that is shared by other devices.

• Never modify the power cord or excessively bend, twist, or pull it.

• Do not allow the power cord to become damaged. Do not place heavy objects on the power cord or expose it to heat.

• Never touch the AC adapter while your hands are wet.

• Should the power cord become seriously damaged (internal wiring exposed or shorted),contact the manufacturer to request servicing.

Use only the specified AC adapter. Use of another type of AC adapter can damage the instrument and create the danger of fire and electrical shock.

To avoid serious eye injury, never look directly into the optical outputs of fiber optic network equipment, test equipment, patch cords, or test reference cables. Always assume that optical outputs are on.

CAUTION: Proper care in handling should be taken when using any precision optical test equipment. Scratched or contaminated optical connectors can impact the performance of the instrument. It is important to keep the dust caps in place when the unit is not being used.

NOTE: Extron power meters and light sources contain no user serviceable parts.

Except for changing batteries and cleaning optical ports, these units must be

returned to Extron or authorized agents for repair and calibration.

Conventions Used in this Guide

TIP: A tip provides a suggestion to make setting up or working with the device easier.

NOTE: A note draws attention to important information.

CAUTION: A caution indicates a potential hazard to equipment or data.

WARNING: A warning warns of things or actions that might cause injury, death, or other severe consequences.

Copyright

© 2011 Extron Electronics. All rights reserved.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

Image 3

Extron electronic FPM 101, FLS 101 manual Conventions Used in this Guide

Contents

FPM 101 / FLS Safety Instructions English Conventions Used in this Guide Page Contents Fiber Optic Test Meters Contents Fiber Optic Test Set offers FeaturesAbout this User Guide About the FPM 101 and FLS Power Source FPM 101 Power Meter offersFLS 101 Light Source offers FLS 101 Light Source AccessoriesFPM 101 Power Meter Typical Applications Operation FPM 101 Power Meter FPM 101 Power Meter Controls and Connections Power Up the FPM Wavelength/Backlight ButtonDB/dBm/μW Button Splash and Auto-Off Screen Test Mode To Set a ReferenceTest Mode To View the Reference Ref/Set Button Field Description Display Readings in Test Mode FLS 101 Light Source Controls and Connections FLS 101 Power Output Wavelength Selection Output Ports and Indicators To Measure Optical Power Measuring Optical Power Test the Transmit Reference Cable Testing Fiber Optic Links FLS FPM Verify the Reference Cables FLS Insert the Link Connections to Measure Link Insertion Loss To Quickly Identify a Fiber Optic Link Using the Tone Generator Cleaning FPM 101 Optical Ports Cleaning Optical Ports Battery Replacement Cleaning FLS 101 Optical PortsRepair and Calibration Loops for Singlemode Transmit Reference Cables Mandrels for Multimode Transmit Reference Cables Specifications Optical specifications FLS 101 fiber optic outputOptical specifications- FPM General Included Accessories Page USA, Canada, South America Japan Central America Extron Warranty