Extron electronic manual Mounting the FOX 2G Tx/Rx AV, Tabletop placement, Rack Mounting

Installation and Setup

Mounting the FOX 2G Tx/Rx AV

The 1U high, quarter rack wide units can be placed on a tabletop, mounted in a rack, or mounted under or through a desk or other furniture. In addition, the receiver can be mounted close to a projector, using the Extron PMK 350 (PN 70-563-0x).

Tabletop placement

Attach the four included rubber feet to the bottom of the unit and place it in any convenient location.

Rack Mounting

UL guidelines for rack mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of the FOX 2G Tx/Rx AV in a rack:

1. Elevated operating ambient temperature — If the unit is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the equipment in an environment compatible with the maximum ambient temperature (Tma: +122 °F, +50 ° C) specified by Extron.

2. Reduced air flow — Install the equipment in the rack so that the equipment gets adequate air flow for safe operation.

3. Mechanical loading — Mount the equipment in the rack so that uneven mechanical loading does not create a hazardous condition.

4. Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Give appropriate consideration to the equipment nameplate ratings when addressing this concern.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

2-2 FOX 2G Tx/Rx AV • Installation and Setup