Extron electronic FOX 2G Tx manual Control/remote, General

Control/remote

Serial control ports on each unit (transmitter and receiver)
Control	1 RS-232, 3.5 mm captive screw connector,
	5 pole (3 pins are used) (rear panel)
	1 RS-232, 2.5 mm mini stereo jack (front
	panel)
Pass-through	1 RS-232, 3.5 mm captive screw connector,
	5 pole (3 pins are used) (rear panel)
Baud rate and protocol
Control	9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through	9600 to 115200 baud
Serial control pin configurations
Pass through	Captive screw connector: 1 = TX, 2 = RX,
	3 = GND
Control	Captive screw connector: 3 = GND, 4 = TX,
	5 = RX
	Mini stereo jack: tip = TX, ring = RX,
	sleeve = GND
Program control	Extron's control/configuration program
	for Windows®
	Extron's Simple Instruction Set (SIS)

General

External power supply	100 VAC to 240 VAC, 50/60 Hz, external;
	to 12 VDC, 2 A max. regulated
Power input requirements	12 VDC, 0.6 A
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) /
	10% to 90%, non-condensing
	Operating +32° to +122°F (0° to +50°C) /
	10% to 90%, non-condensing
Cooling	Convection, vents on side and top
Mounting
Rack mount	Yes, with optional 1U 9.5" deep rack shelf
	(RSU 129, #60-190-01; RSB 129, #60-604-01)
	or 1U 6" deep rack shelf (RSU 126,
	#60-190-10; RSB 126, #60-604-10)
Furniture mount	Yes, with optional under-desk mounting
	kit (MBU 125, #70-077-01)
Enclosure type	Metal
Enclosure dimensions	1.7" H x 4.3" W x 6.0" D (1U high, quarter
	rack wide)
	4.3 cm H x 10.9 cm W x 15.2 cm D
	(Depth excludes connectors)
FOX 2G Tx/Rx AV • Reference Information		A-5