Extron electronic manual Specifications, FOX 2G Tx/Rx AV Reference Information

Reference Information

Specifications

NThe FOX 2G AV consists of a transmitter (FOX 2G Tx AV) and a receiver (FOX 2G Rx AV) with one or two fiber optic cables linking the two units.

NThe analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog video in the receiver.

NThe analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog in the receiver.

NThese transceivers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

Optical fiber interconnection between transmitter and receiver

Number/type 1 or 2 fiber optic

NOnly one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transit return data for bidirectional control/communication

Connectors	2 LC connectors
Operating distance	30 km (18.75 miles) with singlemode (SM)
	cables with an SM model
	500 m (1640') with multimode (MM) cables
	with an MM model

NOperating distance is approximate. These are typical distances. The maximum distance may be greater than these numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors and kinks.

Nominal peak wavelength	850 nm for FOX 2G AV MM model;
	1310 nm for FOX 2G AV SM model
Data rate	2.125 Gbps
Transmission power
Singlemode	-5 dBm, typical
Multimode	-5 dBm, typical

A-2 FOX 2G Tx/Rx AV • Reference Information