Installation and Operation, Introduction, Scp

Introduction

About the SCP 150, SCP 150 AAP, and SCP 150 L

The Extron SCP 150, SCP 150 AAP, and SCP 150 L are hardwired remote control panels for the Extron System 5 IP switcher. All models replicate the switcher’s volume, input switching, and system controls. The SCP 150 AAP also provides four spaces for the addition of optional architectural adapter plates (AAPs) or audio, relay, or IR control modules (ACMs, RCMs, IRCMs).

Unless otherwise noted or implied, the term “SCP” refers to all three models of the SCP 150 (SCP 150, SCP 150 AAP, and SCP 150 L).

The System 5 IP cannot be configured from the SCP control panels. All switcher setup must be done from the switcher or via RS-232. Refer to the System 5 IP manual for information on setting up the switcher.

The System 5 IP supports up to two SCPs. Up to four control modules and one IR Link infrared signal repeater can be daisy- chained with the panels. The SCP accepts signals from the optional IR 402 remote control.

The panels can be mounted in or on walls or furniture. The SCP 150 mounts in a 2-gang electrical box, surface mount box, or mounting bracket and the SCP 150 AAP mounts in a 4-gang electrical box, surface mount box, or mounting bracket.

The SCP 150 L fits into a compact lectern space, into a wall, or into an Extron UCM RAAP or UCM 10X8P faceplate.

Features

Gray, black, white, and RAL9010 white faceplates — The SCPs are available in four colors for integration into a variety of environments.

Customizable, illuminated buttons — The panel buttons can be easily identified, even in low light.

System expandability — The panels can be daisy-chained with Extron’s control modules (IRCMs, ACMs, RCMs) and an IR Link to provide versatile remote control options.

Furniture and wall mountability — The SCPs can be mounted

in or on walls or furniture with the use of optional electrical boxes, surface mount boxes, or mounting brackets.

SCP 150

Chapter2Two