Extron electronic A-4, A-2, A-3 Installation, cont’d, Installing the Cveq 100 AAP/SVEQ 100 AAP

Installation, cont’d

Inside

Outside

SVEQ 100 back of the rack installation example

Installing the CVEQ 100 AAP/SVEQ 100 AAP

The CVEQ 100 AAP and SVEQ 100 AAP are double space high architectural adapter plate products that mount in a wall or furniture using an optional mounting frame.

1. Remove power from the line driver by disconnecting the power supply.

2. Attach the mounting frame to wall box.

3. Route output cables through the wall box and frame and connect them to the line driver.

4. Mount the line driver to the mounting frame with machine screws, as shown in the following illustration. Take care not to damage the output cable(s), which fit through the mounting frame and into the wall box.

Cable

Clamp

	AAP 102
	Connector
	102
	AAP
	AAP
	100
	CVEQ
#4-40 Nut w/ Captive	Extron
Washer
	CVEQ 100 AAP
	Composite Line Driver

Mounting the line driver to a wall box

5. Reconnect the power supply, cable all products (see chapter 3), and restore power to the equipment.

2-10 CVEQ 100 and SVEQ 100 Series • Installation CVEQ 100 and SVEQ 100 Series • Installation 2-11