4-17TPS150 Switching and Transmission System • Serial Communications
Command/response table for programming and operating the TPT150 (Cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)

Front panel lockout

Disable front panel [FP0] [R0•
X1
•FP0•] Disable the transmitter’s buttons.
Enable front panel (default) [FP1] [R0•
X1
•FP1•] Enable transmitter’s buttons.
Toggle front panel lockout [FP] [R0•
X1
•FP•] Toggle front panel status
(enabled-to-disabled or disabled-
to-enabled).
View front panel lockout [FP?] [R0•
X1
•FP?•
X3
] 0 = front panel off, 1 = on.

Transmitter reset

Reset transmitter [DFLT
X16
] {none} 0 = reset serial port settings and
addresses without deleting input
button codes, projector power
codes, input audio level, and
volume.
1 = factory reset, including input
codes, projector power codes,
input audio levels, and volume
level.

Architectural information

View architectural information [ARC] [R0•
X1
•ARC•
X17
] Display the transmitter model,
revision, and connection
information.