Extron electronic Quick Start - TPX 88 Matrix Switchers, cont’d, Create a tie, View ties, 3 4

Quick Start — TPX 88 Matrix Switchers, cont’d

View button selects a view-only mode that prevents inadvertent configuration changes.

Esc button cancels selections in progress and resets the front panel LEDs. The Esc button does not reset the current configuration, the Video and Audio LEDs, any presets, or any audio gain/ attenuation settings.

(TPX 88 A only) I/O button selects/deselects video and/or audio. The I/O button also selects the audio level adjust mode.

(TPX 88 A only) Video and audio LEDs indicate that video and/or audio is selected for configuration. (TPX 88 A only) Mute All button mutes and unmutes all audio outputs.

(TPX 88 A only) Volume knob adjusts the input level or output volume in audio level adjust mode.

Create a tie

1. Press and release the I/O button to select audio and/or video.

I/O

VIDEO Lights green when video is selected.

AUDIO Lights red when audio is selected.

Press the button to cycle through the selections.

2. Press and release the desired input button.

Amber indicates video and audio (audio follow). Green indicates video only (audio breakaway). Red indicates audio only (audio breakaway)

2. Press and release the desired input.

Press and release an input button.

The button lights.

I	1	2
T
N
P
U
O	1	2
U
UP
T
T

The buttons for all tied outputs light.

The buttons for all untied outputs are unlit.

3. Press and release the View button to exit view mode.

5

3. Press and release the desired output button(s).

Amber indicates video and audio tie.

Green indicates video tie.

Red indicates audio tie.

3 4 8

4. Press and release the Enter button.

View ties

1. Press and release the View button.

Press the button to select view mode.

Save or recall a preset

1. Save a preset — Press and hold the Preset button for 2 seconds.

Recall a preset — Press and release the Preset button.

Save a	2 seconds
preset
PRESET		PRESET
Press and hold.		Preset LED blinks.
Recall a
preset
PRESET		PRESET
Press and release.		Preset LED lights.

2. Press and release the desired input or output button.

Press and release the input 1 button to select preset 1.

The button blinks.

The View LED lights when view mode is selected.

VIEW	I	1	2
	T
	N
	P
	U
	O	1	2
	U
	UP
	T
	T

			Preset 2		Preset 3
I		1		2
T
N
P
U
O
U		1		2
UP
T
T
	Preset 9		Preset 10		Preset 11

ENTER

The Enter button blinks to indicate the need to save or recall the preset.

The buttons for all untied outputs light until you select an input.

3. Press and release the Enter button.

QS-2 TPX 88 Matrix Switchers Quick Start