Extron electronic TPX 88 A manual Using presets, 28 - Press the View button to exit view mode

5.	Press and release the View button to exit view mode (figure 3-28).
	I	1	2	3	4	5	6	7	8
	T
	N
	P
	U
Press the View button	O	1	2	3	4	5	6	7	8
	U
to exit view mode.	UP
	T
	T
			All input and output buttons return to unlit or background illumination.

VIEW

The View LED goes out.

I

N P U T

O U T P U T

Figure 3-28 — Press the View button to exit view mode

Using presets

The current configuration (configuration 0) can be saved as a preset in any one of 16 preset memory addresses, or, as many presets as the switcher has input and output buttons.

• Only the audio and video ties are stored and recalled; audio gain settings are not saved, and they do not change when a preset is recalled.

•Presets cannot be viewed from the front panel unless recalled as the current configuration. Presets can be viewed using Extron’s Windows- based control program. See Chapter 5, Matrix Software, for more details.

•The current configuration and all presets are stored in non-volatile memory. When power is removed and restored, the current configuration is still active and all presets are retained.

•When a preset is recalled, it replaces the current configuration, which is lost unless it is also stored as a preset. The recalled preset overwrites all of the current configuration ties in favor of the preset configuration ties.

Example 5: Saving a preset

The following steps show an example in which the current configuration is saved as a preset. Where an explanation is helpful, the steps show the front panel indications that result from your action.

1.	Press and release the Esc button.
2.	Press and hold the Preset button for approximately 2 seconds (figure 3-29).
	Press and hold the button.
	2 seconds
	PRESET	PRESET
		= Blinking LED

Figure 3-29 — Enter save preset mode

TPX 88 Matrix Switchers • Operation 3-17