CBR
This command allows you to change the Baud Rate. You will not see anything on your monitor.
Here is a table of stored rates in the camera…Value Function
1 | 9600 |
2 | 19200 |
3 | 38400 (Default) |
4 | 57600 |
5 | 115200 |
If you can’t resist changing the baud rate, select the appropriate single digit number and hit enter.
LED
This command allows you to change the color. When selecting the option you need to, enter the appropriate single digit number and hit enter. Your screen will be blank during this command. You can input one of the following:
Value | Function |
0 | Amber |
1 | Green |
2 | Red |
3 | Off |
SAP
Store in Flash both correction memories, all registers and DAC values.
| Value | Function |
Store all parameters | 0 | Default factory calibrate |
| 1 | User |
| 2 | User |
The power on values will be the last saved from SAP (X).
RAP
Load from flash to camera. Recall all parameters
| Value | Function |
| 0 | Default factory calibration |
| 1 | User |
| 2 | User |
SBS |
|
|
| Value | Function |
Set bit shift | 0 | 10 bit |
| 1 | 9 bit |
| 2 | 8 bit |
Fairchild Imaging • CAM/CCD 2KCL.TDI &
