Using the Printer Buttons (B-300)

Follow the steps below to clean the inside of the printer using the printer button.

1.Make sure that letter/A4 size paper is loaded in the front paper cassette.

2.Press the ) Paper/Cancel button to feed and eject paper. Repeat these steps until no ink gets on the paper.

Transporting Your Printer

If you need to transport your printer some distance, carefully prepare and repack it as described below. Use the original box and packing materials, or a similar box that holds the printer snugly.

cCaution:

When transporting the printer, do not tilt it, stand it up vertically, or turn it upside down. Otherwise, ink may leak inside the printer.

1.Plug in the printer and turn it on. Wait until the print head returns to the home position.

2.Press the P Power button to turn off the printer, then unplug its power cord.

c Caution:

Do not unplug the power cord while the print head is moving or the print head will not return to the home position.

3.Disconnect the interface cable.

4.Remove all paper from the printer.

5.Confirm that the cartridge lever is in the locked position and the cartridge cover is closed.

c Caution:

Leave the ink cartridges and maintenance box installed to prevent the ink from leaking.

Note:

If you’re using the Extra High Capacity Ink Cartridge, install a standard- or high-capacity cartridge instead when you transport the printer.

6.Close the output tray and paper support.

7.Attach the protective materials to both sides of the printer.

Maintaining Your Printer 146