Version 2.04f
∙Fixed a problem introduced in version 2.04a related to being able to queue multiple courtesy beep messages while a message playback was already in progress.
∙Added separate time-out timer reset delay timers to prevent a situation where a short transmission on one receiver could prematurely cause a time-out of a receiver with a longer time-out time set. An example of this would be if the time-out timer for Rx1 was set to 30 minutes, and Rx2 was set to 3 minutes, if a long transmission was in progress on Rx1 and a brief transmission occurred on Rx2, the repeater would time out based on the shorter 3 minute time even though Rx2 had gone inactive. The new method will allow the individual time-out timers to be reset after the courtesy delay period has elapsed even though a courtesy message was not necessarily generated… in other words, the courtesy reset time is still imposed on individual receivers even though a different receiver still remains active.
∙Added programmable logic output pulse on/off duration periods.
∙Added new feature such that if the internal INIT button is held for 5 seconds AFTER power up has occurred, the Master Password will be reset to default (99) and the Warm Reset message will be sent as an acknowledgement. Useful for regaining control if the password(s) are lost, forgotten or mistakenly changed.
∙The software version runtime variables for CW (9898) and Speech (9899) now include the version suffix as part of the message.
7KDAB, Version 2.0, 19-Aug-2007 | © Vyex LLC, 2003-2007 | 56 |
