FieldServer FS-RA-CLX-BAS instruction manual Inside Cover Door Label, Technical Specifications

FS-RA-CLX_SlotServer_Instruction_Manual_(T17011) Page 9 of 34

TP/FT10 LonWorks connection

This two wire connection is polarity insensitive and can be multi-dropped into a LonWorks Network.

Ethernet Port

The Ethernet port can be used for configuration and troubleshooting, as well as for Protocols that require an Ethernet connection. Use standard Ethernet cables for this connection.

RS-485 Port

This is a standard 2-wire RS-485 port. Specify as R1 in the configuration.

4.2.Inside Cover Door Label

A label has been provided on the inside of the cover door for the User to document important or useful configuration parameters used. In particular, special provision has been made to document the Ethernet port IP parameters, as well as the LonWorks DSN (Domain/Subnet/Node) allocated by the Network Manager. These fields are there to be utilized at the User’s discretion.

4.3.Technical Specifications

Slot width	1
BackPlane Current Load	0.6A
Operating Temperature	0-60 Deg C (32-140 Deg F)
Storage Temperature	-40 – 85 Deg C (-40 – 185 Deg F)
Humidity	5-95% (Non-Condensing)
Allen Bradley Platform:	ControlLogix 1756 Rack
LonWorks Connection type:	TP/FT-10
Ethernet port	10/100 MB/sec.
RS-485 port	2-wire, half duplex.
Approvals1	UL 60950-1:2003
	CAN/CSA-C22.2 No.60950-1-03

1Refer to Error! Reference source not found. to view Certificates.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: support@fieldServer.com