Manuals / FieldServer / Computer Equipment / Server

FieldServer FS-RA-CLX-BAS Appendix A.5.2. Setup, Appendix A.5.3. RSLogix configuration

Models: FS-RA-CLX-BAS

1 34
Download 34 pages 58.58 Kb
Page 27
Image 27

FS-RA-CLX_SlotServer_Instruction_Manual_(T17011)

Page 27 of 34

Appendix A.5. Installing SlotServer on a Remote Rack using CNB Cards

Appendix A.5.1. Hardware and Software requirements

In order to perform this application, the following hardware and software is required as a minimum:

•At least two 1756 racks, where one rack contains the CPU and the other rack contains the SlotServer

•Two Controlnet CNB cards (with cable for connection) to connect the racks to each other

•RSlinx

•RSLogix

•RSNetworx

•SlotServer EDS file (Available on SlotServer CD, or call Technical Support)

Note that it is possible to connect to SlotServer on a remote rack using other 1756 bridging cards. This chapter only deals with CNB, but the principles for using other bridging cards are similar.

Appendix A.5.2. Setup

•Install the CPU and the first CNB card in the local rack.

•Install the second CNB card and the SlotServer in the remote rack.

•Connect the ControlNet Network

•Power up the racks

•Install the SlotServer EDS File using the RSLinx Hardware EDS Installation Tool.

•Make sure the SlotServer has a valid configuration loaded. The default configuration shipped with the SlotServer should suffice.

Appendix A.5.3. RSLogix configuration

In order to see the SlotServer from the CPU, the Hardware must be configured in RSLogix as follows:

•Configure the cards in the local rack in the I/O Configuration section, including the CPU and the local CNB card.

•Right click on the local CNB card and add the remote CNB card using the “New Module” function.

•Right Click on the remote CNB card, and add the 1756 Backplane

•Right Click on the 1756 Backplane and add the cards that are present in the remote rack, including the SlotServer (As a generic I/O module-see earlier section on how to do this)

•Save the RSLogix configuration, and download it to the PLC.

The finished I/O configuration should look similar to this:

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: support@fieldServer.com

Page 26 Page 28
Page 27
Image 27
FieldServer FS-RA-CLX-BAS instruction manual Appendix A.5.2. Setup, Appendix A.5.3. RSLogix configuration
Page 26 Page 28

FS-RA-CLX-BAS specifications

The FieldServer FS-RA-CLX-BAS is a robust communication gateway designed to facilitate interoperability between building automation systems and various network protocols. Its main objective is to provide seamless integration, allowing different systems to communicate effectively, regardless of their underlying technologies.

One of the standout features of the FS-RA-CLX-BAS is its support for a wide range of communication protocols. It can easily bridge between BACnet, Modbus, Johnson Controls N2, and several others, making it an invaluable tool in diverse environments where equipment from multiple manufacturers needs to work together. This extensive compatibility helps streamline operations, reduce costs, and enhance system efficiency.

The device is designed with a user-friendly interface that simplifies setup and configuration. It features a web-based management platform that allows system integrators and technicians to configure settings, monitor system performance, and perform troubleshooting tasks remotely. This accessibility is particularly beneficial in minimizing downtime and ensuring that systems operate optimally.

FieldServer Technologies has also implemented advanced data logging capabilities within the FS-RA-CLX-BAS. Users can track real-time data trends, monitor system performance, and analyze historical data to make informed decisions. This feature is essential for identifying inefficiencies and enabling proactive maintenance, thus extending the lifespan of building systems.

The FS-RA-CLX-BAS is built with durability and reliability in mind, designed for use in demanding environments. Its compact design and robust construction allow for easy integration into existing setups without requiring extensive modifications. Additionally, with support for both wired and wireless communication methods, it offers flexibility in installation.

Beyond its core functions, the FS-RA-CLX-BAS is also equipped with security features to protect sensitive data being transmitted across networks. Encryption protocols help ensure that communications remain secure, mitigating risks associated with unauthorized access.

In summary, the FieldServer FS-RA-CLX-BAS stands out as a versatile and reliable solution for integrating various building automation systems. With its multi-protocol support, user-friendly interface, advanced data logging capabilities, and robust security measures, it empowers facility managers and system integrators to enhance operational efficiency while maintaining a high level of security and reliability. This makes it a key asset for modern building management and automation strategies.