Figure 4-23. The Untagged Configuration Menu
All ports are set by default as Untagged in this switch system, to change port(s) to Tagged just pick the port number you need and select “No” from the Port Map.
Figure 4-24. The MTU/MDU Per Port VLAN Table in The VLAN Configuration Menu
This screen as above only reflects the setting you made in Switch Device Configuration menu - there is no change can be made here. Should you set the VLAN Mode to <MTU/MDU> mode and <one Uplink> port then
port 1 ~ 25 will be mapped to port 26 - the uplink port, otherwise, port 1 ~ 12 and port 13 ~ 24 will be mapped to uplink port 25 and port 26 accordingly.
45
