Fisher & Paykel DS602 manual Problem Solver, Possible Cause, What To Do, See wash program chart or

PROBLEM SOLVER

PROBLEM	POSSIBLE CAUSE	WHAT TO DO
Foaming	Incorrect amount of	See wash program chart or
	detergent	consult the manufacturer’s
		instruction.
	Too much egg yolk	Add detergent into the
	in wash load	pre-rinse compartment.
	Rinse agent setting too high	Decrease rinse agent setting.
Dishes not dry	Incorrect loading	Ensure the dishes are not
		nesting together.
	An Eco Program has been	Try using the Plus
	chosen	programs, the wash program
		light should be Red.
	Rinse agent depleted	Refill the rinse agent
		dispenser.
	Rinse agent setting too low	Increase rinse agent setting.
Detergent not	Detergent was wet when	Clean the dispenser and
dispensing	loaded	ensure the detergent
		dispenser is dry when
		putting the detergent in.
Detergent not	Type of wash program	When using the Fast Eco
dispensing from the	chosen	Save program, detergent
pre wash compartment		should be placed in the
		main wash compartment
		only.
Water Leaking	Drain hose disconnected	Reconnect the drain hose.
	from the waste pipe
	Supply inlet hose	Securely reconnect the
	not connected properly	the inlet hose.
	Other Leaks	Turn the water and
		electricity to your
		DishDrawer off. Call your
		Fisher & Paykel Authorized
		Service Agent.

29