Indicative Lights Faultwhat to do | Fisher & Paykel DS602 specs

FAULT CODE DISPLAYS

INDICATIVE LIGHTS

FAULTWHAT TO DO

Rinse Heavy Normal Fast Delicate

FAULT CODE U1

Fill Fault

Incorrect Installation

Blocked inlet hose

Filter plate and spray arm incorrectly installed

Very low water pressure (<4 psi)

λ

λ

Excessive foam. Refer to Section on Problem Solver.

Check the inlet hose is connected and the water faucet is turned on.

Check the spray arm is correctly placed on the impeller. Refer to the

Section on User

Maintenance

Instruction.

Check the installation of the drain hose(s) and ensure it is supported to the recommended height above the base of the DishDrawer.

Check inlet hose filter is not blocked.

Check the filter plate is properly locked securely in place and the spray arm is correctly on the impeller. Refer to

Section on User

Maintenance

Instruction.

Change the water pressure setting to "LP".

Refer to Section on Option Adjustment Mode.

32

Image 33

Fisher & Paykel DS602 manual Indicative Lights Faultwhat to do

Contents

Page Contents Introduction Unique Features of Your DishDrawerTMClutter-Free Counter Top Becomes a Reality Design Your Own Rack System Guilt-Free Small Load AccessoriesGentler Introduction of Detergent Big On the Inside Please read all instructions before operating the DishDrawer Basic precautions, including the following Installation Operational Maintenance Important Safety Instructions Power Control FunctionsPrimary Control Buttons Start / Pause Lock To Activate Delay Start Delay Start Program Secondary Control Panel Operating Instructions DishDrawerTM Accessories UsagePurpose of Each Insert Plate Insert Baskets Dishdrawertm Loading Cup Rack Posts Cutlery BasketsSpray Arms Detergent Quantities Detergent and Rinse Agent Dispenser Detergent CompartmentsTo Load the Detergent Dispenser Rinse Agent Dispenser Rinse Agent Indicator LightTo Load the Rinse Agent Dispenser How Much Rinse Agent to Use Option Adjustment Mode Rinse Agent SettingTo Enter the Option Adjustment Mode Water Pressure Auto Power Wash Phase Tsp Wash Program Chart Reinstallation of the Upper Kickstrip Installation of Upper Kickstrip Care Guide Cleaning the DishDrawerTM User Maintenance Instruction Vacation Time To Clean the Filter Plate Problem Possible Cause What to do Problem Solver Refer to Section on Foaming Incorrect amount Problem Possible Cause Fault Code U2 Fault Code Displays Indicative Lights Faultwhat to do Fault Code F1 Indicative Lights Fault What to do DishDrawer Warranty Proof of Purchase Service